Dobinsons Spring & Suspension
Dobinsons 3-4" MRR 3-way Adjustable Lift Kit for Toyota Sequoia 2023 on - DSSKITMRA23S - DSSKITMRA23S
Coil Color:
Coil Color
Front Springs:
Front Springs
Rear Springs:
Rear Springs
Pickup available at 837 South Main Street
Usually ready in 2-4 days
Dobinsons 3-4" MRR 3-way Adjustable Lift Kit for Toyota Sequoia 2023 on - DSSKITMRA23S - DSSKITMRA23S
Black / C59-834 / C59-817V
837 South Main Street
Pickup available, usually ready in 2-4 days
837 South Main Street
Troutman NC 28166
United States
Upgrade your Toyota Sequoia for optimal performance with the Dobinsons 3-4" MRR 3-way Adjustable Lift Kit. With superior adjustability, this kit allows for precise tuning to your vehicle and specific driving needs. Experience improved handling, stability, and tire clearance for the ultimate driving experience.
- TRD PRO will yield 1" less lift in front and 1" less in rear
- Front Struts Require Aftermarket UCA's Due to added droop.
- Front Coil Spring Specs
- C59-834 (75mm - 3") 0-110lb Load
- C59-836 (75mm - 3") 110-220lb Load
- C59-838 (100mm - 4") 0-110lb Load
- C59-840 (100mm - 4") 110-220lb Load
- Rear Coil Spring Specs
- C59-817V (Stock Height) Stock Load
- C59-819V (25mm - 1") Stock Load
- C59-821V (50mm - 2") Stock Load / (25mm - 1") 220-440lb Load
- C59-823V (50mm - 2") 220-440lb Load / (25mm - 1") 600-800lb Load
- C59-851V (75mm - 3") Stock Load
- C59-853V (75mm - 3") 220-440lb Load
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression - For creepy crawling and cornering
- 15 Stage Rebound - Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminium Race Piston
- 2.6" Precision Honed Shock Body
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM-HNBR Sealing System
- TSUGAMITM CNC machined components for precise tolerances
- ParkerTM Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low-wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- If doing a 2.5" lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, faliure to complete these requirements could cause OE CV-axle faliure.
- TRD axle shafts: PT362-3432B and PT362-3431B
****Coil seat for MRA59-A446 should be set at 175mm (6.87") from the strut bushing eye to top of coil isolator****