Dobinsons Spring & Suspension
Dobinsons 3-4" IMS Lift Kit for Toyota Sequoia 2023 on - DSSKIT23S - DSSKIT23S
Coil Color:
Coil Color
Front Springs:
Front Springs
Rear Springs:
Rear Springs
Pickup available at 837 South Main Street
Usually ready in 2-4 days
Dobinsons 3-4" IMS Lift Kit for Toyota Sequoia 2023 on - DSSKIT23S - DSSKIT23S
Black / C59-834 / C59-817V
837 South Main Street
Pickup available, usually ready in 2-4 days
837 South Main Street
Troutman NC 28166
United States
Achieve the ultimate lift for your Toyota Sequoia 2023 model with the Dobinsons 3-4" IMS Lift Kit - DSSKIT23S. Designed for optimal performance and durability, this lift kit provides a 3-4" increase in ride height, enhancing your vehicle's handling and off-road capabilities. Upgrade your ride today!
- TRD PRO will yield 1" less lift in front and 1" less in rear
- Front Struts Require Aftermarket UCA's Due to added droop.
- Front Coil Spring Specs
- C59-834 (75mm - 3") 0-110lb Load
- C59-836 (75mm - 3") 110-220lb Load
- C59-838 (100mm - 4") 0-110lb Load
- C59-840 (100mm - 4") 110-220lb Load
- Rear Coil Spring Specs
- C59-817V (Stock Height) Stock Load
- C59-819V (25mm - 1") Stock Load
- C59-821V (50mm - 2") Stock Load / (25mm - 1") 220-440lb Load
- C59-823V (50mm - 2") 220-440lb Load / (25mm - 1") 600-800lb Load
- C59-851V (75mm - 3") Stock Load
- C59-853V (75mm - 3") 220-440lb Load
- Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle
- Fully re-buildable and re-valvable
- vZero shock fade in all terrains with full load
- Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel
- Corrosion resistant (EDP Surface Protection)
- Direct, bolt-on replacement for easy fitment
- 60mm hi-flow CNC 6061 Billet alloy piston
- 2.6" Precision Honed Shock Body
- Heavy duty single piece lower leg
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- If doing a 2.5" lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, faliure to complete these requirements could cause OE CV-axle faliure.
- TRD axle shafts: PT362-3432B and PT362-3431B
****Coil seat for IMS59-60446 should be set at 175mm (6.87") from the strut bushing eye to top of coil isolator****