Dobinsons Spring & Suspension
Dobinsons 2.5-3.5" MRR 3-way Adjustable VT-Series Dual Rate Long Travel Lift Kit for Toyota Land Cruiser 80 Series - DSSKITMRA0019 - DSSKITMRA0019
Coil Color:
Coil Color
Front Springs:
Front Springs
Rear Springs:
Rear Springs
Pickup available at 837 South Main Street
Usually ready in 2-4 days
Dobinsons 2.5-3.5" MRR 3-way Adjustable VT-Series Dual Rate Long Travel Lift Kit for Toyota Land Cruiser 80 Series - DSSKITMRA0019 - DSSKITMRA0019
Teal / C97-146VT 2.5" Heavy Load / C97-147VT
837 South Main Street
Pickup available, usually ready in 2-4 days
837 South Main Street
Troutman NC 28166
United States
Product Description
-
Rear Spring Specs:
- C97-147VT (50mm-2") 300-400lb Load
- C97-145VT (75mm-3") 300-400lb Load
-
Shock Recomendations
- For 2-2.5" Use MRA45-A912 Front - MRA59-A687 Rear
- For 3-4.5" Use MRA59-A684 Front - MRA59-A687 Rear
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression - For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression - For creepy crawling and cornering
- 15 Stage Rebound - Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminium Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM-HNBR Sealing System
- TSUGAMITM CNC machined components for precise tolerances
- ParkerTM Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low-wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- ***Extended Brake lines and Bump stops are highly recommended***
- 2.5 Inch kit requires 1/2" bump stop extension in the front & 2" bump stop extension in the rear
- 3.5 Inch Kit requires 1.5-2" bump stop extension in the front & 3" bump stop extension in the rear
- 2.5 Inch requires front castor bushings & 3.5 Inch requires front castor plates